What are the grade requirements for custom sheet metal fabrication cabinets?
Published on:
2021-03-12
What are the grade requirements for custom sheet metal fabrication cabinets? While cabinets all look the same, there are several types depending on the purpose. Rare are cabinets for wiring and cabinets for servers. The cabinet used for wiring is usually used to place multiple terminal switches, so many network cables need to be connected, and the cabinet is inconvenient to open the door.
So this sheet metal processing cabinet looks more like a rack, and some cabinet manufacturers call this product a patch panel; in addition, the cabinet used to place the server must have doors and locks. Because of the need to protect the valuable equipment inside, noble routers and firewalls are generally placed in this cabinet.
Taking the server sheet metal processing cabinet as an example, there are also grades: this is an ordinary server sheet metal processing cabinet with a glass door. There are four cooling fans installed on the top of the cabinet, which are mainly used for ventilation and heat dissipation, providing a good constant temperature environment for the inside of the cabinet, and the bottom of the cabinet is hollowed out for ventilation and heat dissipation. The cooling effect of the server on the top of this cabinet is good, but the cooling effect of the server in the middle and lower part is not ideal.
The above sheet metal processing cabinet is a relatively high-end server cabinet, which is ventilated and cooled through numerous air holes on the front and rear doors. Therefore, the cold air of the computer room air conditioner can be well distributed around each server in the sheet metal processing cabinet, and the heat dissipation effect of the entire cabinet is good. And this cabinet is made of elegant materials, corrosion-resistant and rust-resistant, and has a strong load-bearing capacity.
Relevant News
Sheet metal processing production process
2022-07-06
Jiangsu Songshi metal products Co., Ltd
E-mail：jsss_metal@163.com
Address: No. 32, Haiyan Road, Qidong high tech Industrial Development Zone, Jiangsu Province
Copyright © 2022 Jiangsu Songshi metal products Co., Ltd.