Inclined console
The operating table can be lifted up and fixed with luxurious hydraulic support, reflecting the high-end quality and humanization of the table
key word:
key word:
钣金加工 | 物流仓储货架 | 五金加工冲压件类 | 零售货架
Classification:
Product Details
Sheet metal processing is mainly to complete the production of products by cutting, forming, correcting and assembling various metal materials. Therefore, you must have certain knowledge about the quantities, properties and uses of common metal materials in order to use these materials reasonably and master the correct sheet metal processing techniques.
Sheet metal processing and cutting
The cutting method is to use a disc shearing blade to cut the sheet in the opposite rolling direction. According to the disc equipment, it can be divided into linear equipment, oblique linear equipment and oblique equipment. Straight equipment is suitable for cutting sheet metal into strips or cutting square blanks into circular blanks in sheet metal processing. The oblique straight equipment is suitable for cutting circular blanks or circular inner holes, and the oblique equipment is suitable for cutting arbitrary curves. blank.
1. Straight equipment to cut paper. When using the straight line equipment to cut the plate, please align the straight line center line of the upper and lower hob first, the gap between the upper and lower cutting blades is usually 0.05-0.5mm, or adjust the upper and lower hob a little. Sheet metal processing The stacking conditions make the stacking height h generally only 0.2-0.3 times the thickness of the shear plate.
2. Sheet metal processing cutting board with tilting equipment. Beveling equipment is widely used for cutting curved boards. Before cutting the paper, the upper and lower reels are tilted devices, and the angle between the upper and lower reels is set to 25 degrees. Then adjust the speed and gap of the egg cutter according to the thickness of the slices.
3. The cutting dimensional accuracy of beveled sheet metal processing equipment. When a generalized disc rolling and shearing curve is chosen, the radius of curvature of the blank has a certain limit, and its small radius of curvature is related to the diameter of the cutting blade and the thickness of the half-body material, and when in the disc rolling For straight bars, the small width error is also limited.
Technological characteristics and performance of inclined operating table:
The humanized structure design is beautiful and generous
The operating table can be lifted up and fixed with luxurious hydraulic support, reflecting the high-end quality and humanization of the table
The front single (double) door is very high from the ground, about 25mm, to ensure smooth and convenient door opening
The hidden hinge will not protrude in the door frame and cabinet, easy to install, and easy to remove the door panel
PU foaming technology ensures the sealing of the table body
Surface treatment: phosphating primer treatment on the table body, powder coating on the outside, there are two kinds of textures: RAL7032 and RAL7035, and the mounting plate is galvanized
Protection class: IP54 (according to GB4205-1993)
Standard configuration: front single (double) door, operating table, cabinet, mounting plate, door lock, sealing strip, hydraulic support
Steel plate thickness:
Cabinet: 2.0mm Door: 2.0mm
Operating table: 2.0mm
Mounting plate: 2.5mm
Related Products
Product Message
Jiangsu Songshi metal products Co., Ltd
E-mail：jsss_metal@163.com
Address: No. 32, Haiyan Road, Qidong high tech Industrial Development Zone, Jiangsu Province
Copyright © 2022 Jiangsu Songshi metal products Co., Ltd.