KP-combination control cabinet
Special door panel square tube reinforcement system can be screwed to the door panel for easy removal
key word:
key word:
钣金加工 | 物流仓储货架 | 五金加工冲压件类 | 零售货架
Classification:
Product Details
Sheet metal processing is mainly to complete the production of products by cutting, forming, correcting and assembling various metal materials. Therefore, you must have certain knowledge about the quantities, properties and uses of common metal materials in order to use these materials reasonably and master the correct sheet metal processing techniques.
Sheet metal processing and cutting
The cutting method is to use a disc shearing blade to cut the sheet in the opposite rolling direction. According to the disc equipment, it can be divided into linear equipment, oblique linear equipment and oblique equipment. Straight equipment is suitable for cutting sheet metal into strips or cutting square blanks into circular blanks in sheet metal processing. The oblique straight equipment is suitable for cutting circular blanks or circular inner holes, and the oblique equipment is suitable for cutting arbitrary curves. blank.
1. Straight equipment to cut paper. When using the straight line equipment to cut the plate, please align the straight line center line of the upper and lower hob first, the gap between the upper and lower cutting blades is usually 0.05-0.5mm, or adjust the upper and lower hob a little. Sheet metal processing The stacking conditions make the stacking height h generally only 0.2-0.3 times the thickness of the shear plate.
2. Sheet metal processing cutting board with tilting equipment. Beveling equipment is widely used for cutting curved boards. Before cutting the paper, the upper and lower reels are tilted devices, and the angle between the upper and lower reels is set to 25 degrees. Then adjust the speed and gap of the egg cutter according to the thickness of the slices.
3. The cutting dimensional accuracy of beveled sheet metal processing equipment. When a generalized disc rolling and shearing curve is chosen, the radius of curvature of the blank has a certain limit, and its small radius of curvature is related to the diameter of the cutting blade and the thickness of the half-body material, and when in the disc rolling For straight bars, the small width error is also limited.
High load-bearing, high-strength, suitable for load-bearing requirements
High protection grade, suitable for harsh environments such as outdoor or wet
Anti-vibration, can be used in vibration environment such as vehicle
Electromagnetic shielding, electrostatic shielding, effectively shielding electromagnetic or electrostatic interference
Personalized customization, multi-style, non-standard customization
Combined control cabinet, suitable for use in parallel cabinets
The top plate can be removed and the side plate can be disassembled, making it easier to work
The door panel is very high off the ground, about 25mm, to ensure flexible and smooth door opening
Unique 10% off profiles
The special door panel square tube reinforcement system can be fixed on the door panel with screws for easy disassembly
The densely distributed 25mm pitch modular holes on the frame ensure the flexibility and versatility of installation
The optional 3.0mm galvanized mounting plate can be pushed into the cabinet from the front through the guide rail by using a plastic slider, and there are U-shaped folds on both sides to make the mounting plate firmer and easier to handle
Material: cold rolled steel plate
Surface treatment: The cabinet is treated with phosphating primer, the exterior of the cabinet is powder coating, the color can be divided into RAL7032 and RAL7035 texture, and the installation plate is galvanized
Protection class: IP56 (according to GB4205-1993)
Standard configuration: front door, back panel, mounting plate, cabinet, sealing strip, door lock, side panel (optional)
Steel plate thickness:
Frame: 10% off profile 1.5mm
Door panel: 2.0mm
Back panel, side panel: 1.5mm
Mounting plate: 2.5mm (optional 3.0mm)
Details of KP combination control cabinet:
The nine-fold profile structure ensures the overall high-strength structure of the cabinet
Related Products
Product Message
Jiangsu Songshi metal products Co., Ltd
E-mail：jsss_metal@163.com
Address: No. 32, Haiyan Road, Qidong high tech Industrial Development Zone, Jiangsu Province
Copyright © 2022 Jiangsu Songshi metal products Co., Ltd.