SKJ condensate evaporator
When using, connect the condensed water outlet of the air conditioner to a plastic water pipe, and insert the other end into the water pipe hole of the evaporator. Note that the water pipe must be inserted into the stainless steel water tank inside the evaporator.
key word:
key word:
钣金加工 | 物流仓储货架 | 五金加工冲压件类 | 零售货架
Classification:
Product Details
Sheet metal processing is mainly to complete the production of products by cutting, forming, correcting and assembling various metal materials. Therefore, you must have certain knowledge about the quantities, properties and uses of common metal materials in order to use these materials reasonably and master the correct sheet metal processing techniques.
Sheet metal processing and cutting
The cutting method is to use a disc shearing blade to cut the sheet in the opposite rolling direction. According to the disc equipment, it can be divided into linear equipment, oblique linear equipment and oblique equipment. Straight equipment is suitable for cutting sheet metal into strips or cutting square blanks into circular blanks in sheet metal processing. The oblique straight equipment is suitable for cutting circular blanks or circular inner holes, and the oblique equipment is suitable for cutting arbitrary curves. blank.
1. Straight equipment to cut paper. When using the straight line equipment to cut the plate, please align the straight line center line of the upper and lower hob first, the gap between the upper and lower cutting blades is usually 0.05-0.5mm, or adjust the upper and lower hob a little. Sheet metal processing The stacking conditions make the stacking height h generally only 0.2-0.3 times the thickness of the shear plate.
2. Sheet metal processing cutting board with tilting equipment. Beveling equipment is widely used for cutting curved boards. Before cutting the paper, the upper and lower reels are tilted devices, and the angle between the upper and lower reels is set to 25 degrees. Then adjust the speed and gap of the egg cutter according to the thickness of the slices.
3. The cutting dimensional accuracy of beveled sheet metal processing equipment. When a generalized disc rolling and shearing curve is chosen, the radius of curvature of the blank has a certain limit, and its small radius of curvature is related to the diameter of the cutting blade and the thickness of the half-body material, and when in the disc rolling For straight bars, the small width error is also limited.
SKJ Condensate Evaporator Introduction:
●Evaporator is used in conjunction with the cabinet air conditioner produced by our company to collect and evaporate condensed water.
●When using, connect the condensate water outlet of the air conditioner to a plastic water pipe, and insert the other end into the water pipe hole of the evaporator. Note that the water pipe must be inserted into the stainless steel water tank inside the evaporator.
SKJ condensate evaporation parameters:
●Evaporation: 1500ML/h
●Power supply: single-phase 220V
●Current: 0.01-2A
●Input power: 400W
●Heating mode: PPC heating mode
●Installation method: vertical wall-mounted installation
●Weight: 26Kg
●Dimensions: 141*240*189mm
●Anti-dry burning function: Yes
Related Products
Product Message
Jiangsu Songshi metal products Co., Ltd
E-mail：jsss_metal@163.com
Address: No. 32, Haiyan Road, Qidong high tech Industrial Development Zone, Jiangsu Province
Copyright © 2022 Jiangsu Songshi metal products Co., Ltd.